manualshive.com logo in svg

FASTERHOLT FM4550, User Manual And Spare Parts Catalogue

Share
Download
FASTERHOLT FM4550 User Manual And Spare Parts Catalogue Download Page 11

11

Nelson SR 150 

Factory-adjusted to Danish conditions and ready to use after the following three steps:

 

1. 

Select the nozzle size that best suits your application and install it. Performance data for the different sizes are 

shown in the table below.

2. 

Adjust the stop on the part circle to obtain the desired irrigation angle.

 

3. 

There is a grease fitting which should be checked once a week for refilling.

 

ADJUSTMENT

ADJUSTMENT
The only thing you can adjust is the counterweight on the drive arm. By moving 

the counterweight forward, the gun will slowly irrigate from side to side. If you 

move the counterweight back, the gun will irrigate quickly. If it does not irrigate 

quickly enough, you can remove the brake springs (no. 778474) in pairs (contact 

the service department)

WARNING: DO NOT ADJUST WHEN THE GUN IS IRRIGATING !! DANGER........: HIGH WATER 

PRESSURE – STAY CLEAR !!

Summary of Contents for FM4550

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands