FASTERHOLT B2, User Manual And Spare Parts, Page: 4 / 84

4
Introduction
BORDING Type 2-3-4-5TT2 Irrigator
The BORDING Type 2-3-4-5TT2 is a stationary type irrigator with a hose drum (rewind machine). The hose drum is mounted on a turntable
and equipped with a gun trailer lift, so the unwind direction can be changed without having to move the machine. A turbine is used to
power the machine and rewind stops automatically when the gun trailer reaches the machine.
The machine can also be fitted with an automatic pump stop function for high pressure or low pressure. With the high pressure stop
function, make sure that the pump is either switched off via a pressostat or can dispose of water by other means when the machine stops
irrigation. With the low pressure stop function, the pump must be stopped via a pressostat.
It should be noted that this is a field irrigation machine and that progress is made with water under high pressure, as well as high pressure
from the gun. This means there is a risk of injury if the machine is used inappropriately, so the warnings and safety instructions given here
must therefore be respected and followed precisely.
Make sure that no unauthorised persons have access to the machine during operation.
To get the greatest benefit from the machine, it is important that the operating instructions are followed precisely. Only a few levers are
required and they are described in the correct order. After a short period of using the machine, these levers become a matter of course, just
as a last look at the plant in operation is a matter of course.
We must also point out that any damage caused by incorrect operation, use of the machine outside its working area (see the
Working Area section) and/or negligence is not covered by the warranty.
Fasterholt Maskinfabrik only guarantees new machines sold through an authorised Fasterholt dealer and only after the enclosed
start-up list has been reviewed, completed and signed.
In the event of any structural change/modification carried out on the irrigator without the written consent of A/S Fasterholt
Maskinfabrik, we disclaim all liability and the warranty shall be declared void.
In addition, our liability does not cover defects caused by materials obtained by the buyer or by constructions prescribed or
specified by the buyer.
Should a problem occur with the machine or if you have any questions, please contact your Fasterholt dealer.
Best regards,
A/S Fasterholt Maskinfabrik
General Safety