3908
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel,fax:+48 58 56 300 80 www.ega.com.pl
USAGE
The tool is designed for grinding and polishing surfaces with varied
structure and hardness, especially helpful during metal processing.
It is not allowed to use this device discordant with its purpose
SAFETY RULES
WARNING!
Every incorrect use of product or accessories cooperating with it may
cause serious personal injuries, fire, explosion. Because of this fact, to achieve the best
work results with the equipment and for your safety we recommend to acquaint and
comprehension with the instruction manual. Every person working with the tool should
be familiar with this instruction manual. Every person with the tool should be familiar
with this instructions and compare it with work safety regulations at workplace in the
enterprise.
Use the equipment only in well ventilated space. Never make unassisted modifications,
repairs, improvements of the tool entrusted to you. Working with pneumatic tools may
cause personal injuries, that is why you should always wear protective mask, goggles,
hearing protection, gloves. If you have long hair tie them and keep away from rotating
parts of pneumatic tools. Use a dust-overall and a hood.
WARNING!
Long-lasting vibrations emitted with the pneumatic tools on the hand of the
operator may cause serious medical condition and afflictions.
WARNING!
Pneumatic tools are supplied with compressed air pressure. Because of this fact,
there should always be taken special precautions while working. Never exceed the maximum
working pressure of this device. Always use hoses with an electrostatic discharge
.
Be sure you use only tight and not damaged hoses and connectors.
Use products and other accessories, only when there is certainty
it can work properly with the device. Never clog air outlets with fingers. Never point the tool
at people, animals or yourself. Always disconnect the compressed air before any service
operations. Never modify the device on your own. Examine if all elements are efficient and if
are worn out replace parts only with the original ones. Before cleaning or component
replacement make certain if the compressed air is disconnected and press the trigger to have
absolute certainty there is no pressure.
