2557
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel/fax +48 58 56 300 80
11
Translation of the Original Instruction
Manual
WARNING! BEFORE USING POWER TOOLS CAREFULLY READ THIS
INSTRUCTIONS AND KEEP IT FOR FURTHER USE
Technical data
Voltage:
230V~/50Hz
Rated input:
100W
Type of work:
S2 20% 12s / 48s
Weight:
0,65kg
Admission
Soldering is designed to connect using a soldering metal materials using adhesives tin -
lead soldering soft. Soldering iron should be used in intermittent cycle S2 20% - up to 12 s
of heating, then you should stop work for at least 48 seconds.
The instrument has been designed exclusively for use in households and can not be used
professionally, ie. In the workplace and for jobs.
Correct, reliable and safe operation of the device is dependent on proper use, because:
Prior to operating the tool, read all instructions and keep it off.
For any damage or injuries caused by using the tool misuse, failure to comply with safety
regulations and instructions in the following supplier's responsibility.
Using the tool misuse causes the loss of your rights under the warranty and non-compliance
with the contract of sale.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious
injury
.
Save all warnings and instructions for future reference.
In warnings provided herein the expression "power tool" means a power tool powered from
the mains (with a power cord) or a battery powered power tool (cordless).
1) Work area
a)
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Summary of Contents for 2557
Page 2: ......