Page 9
For technical questions, please call 1-888-866-5797.
Item 96755
Sa
Fety
Opera
ti
O
n
Maintenance
Setup
troubleshooting
problem
possible causes
possible Solutions
Staple Gun
does not staple
1� Staples not loaded correctly�
2� Magazine Unit not fully
and properly inserted
into Staple Gun�
3� Lever not pulled completely up
and then fully pressed down�
1� Verify that staples are loaded
into the Magazine Unit flat and
with prongs facing upward�
2� Check that Magazine Unit
is fully inserted�
Stapler jams
during operation
Staples jammed in channel�
1� Pull out the Staple Channel�
2� Remove jammed fasteners from
the channel� You may need to use
long-nosed pliers (not included)�
3� Make certain that you are using
correct size fasteners�
4� Replace Staple Channel�
Follow all safety precautions whenever diagnosing or servicing the tool.
