Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B
24/7 Toll-Free Technical Support: 1-800-243-9271
The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited.
Page 5
Xwire
TM
Adapter Installation
Signal LEDs
Special States
Bars
Link Quality
NONE (0)
No signal or No messages received
ONE (1)
Moderate signal
TWO (2)
Good signal
THREE (3) Excellent signal
LED Action
Description
Strobe effect using all
LEDs
Device is scanning the
channels for available networks
All LEDs blink on and
off simultaneously
every 500ms
Device has detected a multiple
SCK address conflict and is
waiting for resolution
8.
The FAST controller is now ready to be used as
an Xwire wireless device.
Bezel Adapter for
VC-210 and EM-99 Controllers
REQUIRED PARTS
(1)
Xwire Bezel Adapter
FAST Part No. 231-60206-01
(2)
Self-tapping Connectors (included)
FAST Part No. 141-51026
Qty. 2
INSTALLATION
1.
Locate wires numbered 1 and 3 in the 9-pin
connector on the VC-210 or EM-99.
2.
Clamp self-tapping connector to these wires to
provide a 24VAC output for the bezel.
3.
Connect the two spade terminals to the pair
coming from the bezel.
