Fast UT3P, Operation And Maintenance Manual

Page: 35 / 84

OPERATION
PAGE 32
Cover is tethered to the tank.
• Lay cover against tank.
7. Follow chemical manufacturer’s direc-
tions for adding chemical to the tank.
8. Insert water hose into tank. Be sure
hose is far enough in the tank to pre-
vent spilling.
•Hold hose in tank to prevent it from
coming out of the tank.
9. Slowly turn on hose. Use a low pres-
sure to prevent splashing and spilling.
10. Fill tank with required amount of solu-
tion. Use the tank scale on the side as
a guide.
Do not over fill the tank.
11. Lift water hose above tank before turn-
ing off to prevent drawing chemicals
into hose line. Turn off hose. Allow fluid
to drain before removing hose.
12. Remove and properly store hose.
13. Replace the cover.
•Turn cover clockwise until tight.