Fast FV3000-DOS, Instruction Manual

Page: 49 / 66

FV3000
- - 39
5.3 Board Installation Procedure
(1) Turn OFF the power of the FV3000 and disconnect all the cables from the
machine.
Do not skip this step to avoid malfunction. (Refer to “5.1 Precautions”)
(2) Check the settings of the board.
When you set the DIP switches or other settings, be sure to double-check the settings to prevent malfunction.
(3) Open the cover and make preparations for installing the board.
Open the main unit cover. If cables obstruct the board, disconnect the cables. Remember where each cable is
connected. Be careful not to access the cables when disconnecting them. (Refer to “5.2 How to Open the Main
Unit Cover”)
(4) Install the board in position.
Install the board, while referring to the manual for the board. After fitting the board into the slot, fasten
the bracket with screws.
(5) Put back the cover and cables.
Reconnect all the cables to the FV3000 and fasten them with screws. Place the cover back in place.