I. OPERATION
Place the scale on a flat surface.
1. Press the [POWER/TARE] key to turn the scale on.
2. Wait until "0.0” or "0.00" is displayed.
3. Place the object(s) on the weighing platform.
4. Using the [MODE] key, you can switch between the
different weighing units.
5. When finished weighing, you can hold the [POWER/
TARE] key to turn the scale off.
II. TARE WEIGHING
(subtracts the weight of a container.)
1. Turn on scale as described above.
2. Place the "tare item" (container) on the platform.
3. Press [POWER/TARE] and wait until "0.0" or "0.00"
is displayed.
4. Add the "net-weight-item" (weight of contents only).
III. CALIBRATION
Calibration is not required before first use. Only
calibrate if scale is not weighing properly.
M-50 - uses a 50g calibration weight
M-100 - uses a 100g calibration weight
M-250 - uses a 200g calibration weight
M-500 - uses a 500g calibration weight
M-100 Calibration Method
1. Turn OFF the scale.
2. Press and hold the [MODE] key and [POWER/
TARE] key at the same time until the display shows a
random number.
