Eye and Breathing Protection
The polishing process may create dust and other airborne particles. There is no dust
extraction function on this machine so it is essential that approved eye and breathing
protection is worn.
Noise and Ear Protection
Depending on the material being worked on and the type of polishing disc used, noise
levels may cause hearing damage including temporary or even permanent hearing loss.
It is recommended that Ear Protection is worn at all times when using the polisher.
Repetitive Strain Injury (RSI)
All products of this nature can cause RSI if used for long period, particulary in an
awkward operating position. Adequate rest periods and working conditions should be
considered for prolonged use.
General Safety Information
1
Ensure the polishing pad is equal to or greater than 120% of the stated RPM of the
polisher.
2
Keep the workplace clean and tidy.
3
Use the tool in a well ventilated area.
4
Air hoses can present a trip hazard, always keep hoses in a way that minimises trip
hazards.
5
DO NOT hold the workpiece by hand, always make sure the workpiece is clamped
securely.
6
Keep all flammable and combustible materials away from the work area.
7
Children and other unauthorised persons should be kept away from the work area.
8
NEVER use the polisher whilst the floor underfoot is wet or slippery.
9
NEVER use the polisher when standing on an unstable surface.
10
Keep the polisher out of reach of children.
11
Analyse the material you are polishing. Be aware of the dangers of polishing lead based
paints. Historically, paint contained lead and polishing such paint may cause toxic
particles to enter the atmosphere. If you suspect that lead could be in the paint the
following actions must be observed;
- Alert any other persons in the nearby and keep them away from the working
area.
- Use specific air fed respirator, PE coated coveralls and latex gloves.
- Dispose of any dust and paint waste correctly and thoroughly clean the
workpiece and working area after the polishing has finished.
12
NEVER attempt to sand materials containing asbestos.
13
VIBRATION. Hand held air tools may produce vibration. Vibration from polishers can
cause disease. The use of gloves will help reduce the risk and can help prevent injury.
14
Disconnect the air supply before changing disc or pad.
15
Ensure the polisher has stopped rotating before putting it down or handling the pad or
disc.
16
NEVER carry the polisher by the air hose.
17
NEVER point the polisher at other persons.
18
NEVER operate the polisher whilst under the influence or drugs, alcohol or intoxicating
medication.
19
Check you have no loose clothing, hair, jewellery or any other items of a personal nature
that might become entangled with the rotating parts.
20
Check you have a maximum inlet air pressure of 90PSI/6.3BAR.
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE
Fast Mover Tools Limited
T: 01582 661993 F: 01582 667100 E: [email protected]
www.fastmovertoolsuk.com
FT1068_Product Instructions 21/07/2014 14:39 Page 3
