IMPORTANT
Please read through this Manual carefully before using the FMT9500.
This tool must only be used for spraying and within the parameters
outlined in this manual. All users of the equipment should be trained in any
risks associated with the products they are spraying or using as spraying
and finishing aids.
Wise Precaution
This product is free from
contaminants. However, we
do recommend that you flush
your gun through with a
suitable thinner before use
as a preventative precaution.
General Safety Instructions
1
Users must choose the correct spraygun, with suitable setup and paint flow,
for the job requirement.
2
Before connecting the spraygun, check the air pressure available is suitable.
3
Follow all HSE guidelines regarding sprayguns and their use as well as your own
Health & Safety Policy.
4
Switch off air source before refilling, cleaning or servicing the spraygun.
5
Never leave your spraygun exposed to dust, silicone, acids vapors, explosive or
flammable gases, rain, sun, fog or snow.
6
Ensure the air line cannot be twisted, pinched or damaged.
7
NEVER carry tool by the air hose.
8
Never expose air hose to heat, oil, water or sharp edges.
9
DO NOT allow children to use or play with this tool or enter the work area.
10
DO NOT store this tool in a place that is within reach or accessible to children or
unauthorised persons.
11
Store this tool in a dry and secure location.
12
DO NOT open or tamper with any part of this tool. Cleaning and servicing of the
spraygun is permitted but repairs can and must only be carried out by an authorised
service centre.
Fast Mover Tools Limited
T: 01582 661993 F: 01582 667100 E: [email protected]
W: www.fastmovertoolsuk.com
Fast Mover Tools Limited
T: 01582 661993 F: 01582 667100 E: [email protected]
W: www.fastmovertoolsuk.com
Features and Benefits
- Reduced air consumption means less
strain on compressor.
- A high transfer efficiency
or 68%+/- reduces paint use.
- Stainless steel fluid nozzle and needle
allow for use of water based coatings.
- Significant reduction in operating costs.
Specification
Working air pressure
2BAR/20-28PSI
Air consumption
270L/Min
Paint pot capacity
600ml
Paint pot thread
M16 1.5P
Weight
450g
Air inlet
¼
Pattern width
300mm
