Fig. 2
If properly positioned and setup a single
AIR250 will be able to dry an entire side
of a medium sized vehicle.
The guns can be operated independently
to carry out work on small areas. The
guns can also be removed from the stand
and used as a standalone tool.
Quick Release Air Coupling
AIR250
Instruction Manual
Fast Mover Tools
T: 01582 661993 F: 01582 667100 E: [email protected]
www.fastmovertoolsuk.com
Fig. 1
Air Filter/Regulator
Whip
Hose
Airline
Air Fitting
To Air Tool
Air
Source
5
Your compressor must be powerful enough to provide enough air to power the guns
effectively. An under specified compressor will not provide enough air leading to poor
performance and in some extreme cases can lead to compressor oil being sucked up the
air line leading to contamination of the air system and guns.
Installation
1
Check the tool over to make sure no part is missing or damaged.
2
Fitting an Air Filter/Regulator is recommended.
3
Refer to
Fig. 1
for the recommended airline setup.
4
It is strongly advised that you always use a Whip Hose/Leader Hose in combination with
Quick Release Couplings.
5
Make sure that your airline is free from water at all times.
Maintenance
1
Replace worn or damaged parts using genuine parts only.
2
Store tool in a dry area, do not allow tool to be immerse in water or used/stored in wet
conditions.
