7
ASSEMBLY OF THE FITNESS TRAMPOLINE
Follow these steps for the assembly of your Fitness Trampoline :
1. Open the packaging box and you should have the base structure (frame + jumping mat
+ s cover).
2. Unfold the base carefully while applying some strength all around the circle frame with
your feet and hands around it. Watch out for any sudden returning movement from the
frame. You should obtain a flat circle.
3. Turn over your trampoline (visible springs) and screw the feet on each nozzle (after
removing each plastic lid).
4. Replace the lids over each foot.
a. For the “T-Barre” trampoline: locate the hole on the inside of the metallic
structure. “Remove the lid located there. Turn around your Fitness Trampoline
and insert the T-shaped handlebar inside the foot while sliding at the same time
the plastic wedge between the handlebar and the structure. Insert then the long
screw and screw the lot together on the outside with a washer and a nut. Tighten
the ramp with the big manual screw.
b. For the “Double-Barre”: return your trampoline, insert the handlebar into both
feet after removing the lids. Screw together the supporting ramps with big
manual screws.
5. Assemble the fixation ramps to the respective handles.
a. Screw handle T to the ramp.
b. The U handle clicks into both ramps.
6. Choose the height of your handlebar and set it up with the small manual screws.
7. Once the handlebar is stabilised, finalise the assembly by inserting the safety pin inside
the provided hole in the base.
8. This is how your Fitness Trampoline should look once mounted.
ENGLISH
Please check for the mounting illustrations at the end of the Instructions’ Manual
