Page
2
/ 2
4 - Installation
How to install your EnergyCam RS 232:
1
Software installation
Download the latest ECWin build from our website:
http://www.fastforward.ag/eng/download
2
Documentation review
Review the installed documentation (EnergyCam_Manual.pdf) which explains how to install EnergyCam
on a sensor and how to use them. You can find EnergyCam_Manual.pdf via Windows start menu
(Start/All Programs/FASTForward/EnergyCamWin/Documentation). For details on how to integrate
EnergyCam into your RS 232 network see
the document “Overview Communication Interfaces” in the
download area of our website.
5 - EnergyCam production defaults
EnergyCam RS 232 is configured by default as:
Electricity
wM-Bus: disabled
Auto power down: disabled
Read decimal: enabled
Reading timer: 15 minutes
Font: White on Black
Modbus, 115200 baud, 8E1
Slave address: 1
6 - Technical support
If you have any problems or questions, please contact us directly:
You can reach us from Monday to Friday between 0900 and 1700 CET
Tel: +49 (0)89-540-40-100
www.fastforward.ag/eng/support
FAST FORWARD AG Ruedesheimer Strasse 11, D-80686 Munich