NDT 200
™
Manual, Fast Forward Video, Inc.
7
Front Bezel Buttons and Functions
POWER Switch:
The green pushbutton is the power button, press and release to start the NDT 200™.
When the unit is “On”, pressing the power button for 5 seconds will turn the unit “Off”.
PASS-THRU:
The LED below the power switch will flash red once per second indicating that it is in
digital pass-thru mode, which indicates the D.V.R. is record ready. The status line of the LCD panel will
also display PASS-THRU at this time.
Pushbutton Operation
Function Req.
State
Keys
Notes
Start Record
Any but Record
REC
Stop Record
Record
■
+
REC
Hold Stop and tap Record
Change to Pass-Thru
Play or Stop
■
+
REC
Hold Stop and tap Record
Play forward – 1x
Stop
►
Pause Play
■
Step Fwd 1 frame
Play or Stop
■
+
Hold Stop and tap Fast Fwd
Step Rev 1 frame
Play or Stop
■
+
Hold Stop and tap Rewind
Seek to end of loaded
clip
Play or Stop
Seek to start of loaded
clip
Play or Stop
Scan Fwd – 5x
Play
≠
5x
►
+
Hold Play and tap Fast Fwd
Scan Fwd – 30x
Play = 5x
►
+
Hold Play and tap Fast Fwd
Scan Rev – 5x
Play
≠
-5x
►
+
Hold Play and tap Rewind
Scan Rev – 30x
Play = -5x
►
+
Hold Play and tap Rewind
Clear Disk
Any but Record
+ +
REC
Push and hold
, then
, then press
REC
and release all three (LED flashes red and
green quickly), then press and hold
REC
for 5
seconds. LED will flash fast red, until last two
seconds of format - it changes to fast green
blink. Returns to slow red blink when ready to
record.
