Fasep 2000 srl
Rev. 1.0
Balatron B150: User’s Manual
07 June 2016
2-3
2.4
Electrick Hookup
!
CAUTION:
Failure to follow these instructions can results in damage to unit or create an electrical hazard and
will void warranty.
2.4.1
Electrical hookup is to be provided by a qualified electrician
2.4.2
A fusible wall-mounted switchbox is required at the installation site. This switch should provide on-off control and overload
protection for your wheel balancer only. The switchbox should be fused with time-delay fuse(s) in accordance with the
power rating specified on your wheel balancer.
2.4.3
Electrical connection of the machine should be by plug connectors.
2.4.4
The balancer must be effectively connected to ground. The electric cord is regularly provided with a ground terminal.
2.4.5
Make sure that Power Rate Specifications for your wheel balancer (refer to nameplate on the wheel balancer) comply
with those provided by the external power source.
!
CAUTION
After electrical hookup has been performed unit is ready to operate. Always observe pertinent safety
precautions when operating the unit (see Appendix tables for an overview of relevant Safety
requirement).
The unit is operated with 12V battery
Wall mount battery charger is provided.
Summary of Contents for BALATRON B150
Page 39: ......