Fasel Elektronik FCU2000-IR series, Operating Manual

Page: 27 / 44

„Basic settings“ menu
B_FCUxxxx-IR / Version V 1.07 Operating manual Series FCU2000/3000/4000-IR 27










Fig. 11: "Display lighting" view (example)
3. Press the key.
4. Value flashes.
5. Adjust the desired value:
Press the key: Reduce value.
Press the key: Increase value.
0: dark
9: bright
6. Press the key. The adjusted value is accepted.
7. Exit the menu using the key.
7.1.4 Adjust display contrast (only for FCU4xxx)
In this menu you can change the contrast of your display.
1. Press key “basic settings“. The lamp next to the key must light.
2. Press the -key until the following view is shown:







Not available with FCU2xxx and FCU3xxx
Fig. 12: View "light settings" (example)
3. Press -key.
4. Select desired contrast with the keys or .
5. Press -key to confirm selection.
7.1.5 Light settings (only for menu "Pro")
In this menu you can set the time, when the light should go on and how long it should
stay on after the end of a mode.