2
ASSEMBLY INSTRUCTIONS
Please keep these instructions for future reference. Adult assembly required.
This table is not a toy & is intended for use by or under the supervision of adults.
Please do not sit, climb or lean on the table.
This table is intended for indoor use only.
Parts Identifier
1.
Find a clean & level place to begin the assembly of your CARNIVAL table football game. You
will need a Phillips screwdriver, a 13mm & a 17mm spanner & a hammer. Remove all parts
from the box & save all packing materials until the parts have been inspected & the table is
assembled.
2.
Attaching the legs – place the table onto the floor facing the correct way up. Open the table,
lift the lid & use the metal lid prop provided to keep the top open. Remove the poles, slopes,
legs & plastic parts bag from inside the table. Close the table & stand it up on its end so that
it can be opened 90 degrees like a book. Important – this should be carried out by 2 adults.
3.
Make sure the legs are the correct way round (see below) & then attach the legs into the
slots underneath the table using the bolts, washers & nuts provided. Fit the rubber feet to
the bottom of each of the 4 legs.