Deep Freeze Standard User Guide
14
|
Installing Deep Freeze
Install Using Imaging
Deep Freeze has been designed to work with all major imaging and desktop management
software. Use either an Attended Install or the Silent Install to install Deep Freeze on a master
image.
Deep Freeze must be prepared for deployment before finalizing a master image. To prepare the
master image for deployment complete the following steps:
1. Restart the computer into a
Thawed
state.
2. Launch Deep Freeze using the keyboard shortcut
CTRL+SHIFT+ALT+F6
. Alternatively, press
SHIFT
and double-click the Deep Freeze icon in the System Tray.
3. Enter the password and click
OK
.
4. Click
Set Flag
in the
Status
tab.
5. The message
The flag has been set successfully. Do you want to reboot your computer now?
is displayed. Click
Yes
to reboot the computer immediately. Click
No
to reboot the computer
later.
After imaging, the computers require an additional restart for Deep Freeze to correctly detect the
changes in disk configuration. If the computers are imaged in an unattended mode, steps should
be taken to ensure the computers are restarted to allow the configuration to update.
