Faro FOCUS3D X 130, User Manual, Page: 76 / 190

FARO
®
Laser Scanner Focus
3D
X 130 Manual
January 2014
68
Chapter 6: The Focus
3D
X 130 Controller Software
Projects
- Select the current scan project, add new or edit existing projects (see
“Managing Scan Projects” on page 68
). Click to get a list of all available
projects.
Profiles
- Select the current scan profile, create new or edit existing scan profiles.
See “Managing Scan Profiles” on page 73.
Operators
- Select the current scanner operator, create new or edit existing
operators.
See “Managing Operators” on page 75.
General Settings
- Opens the menu of the general scanner settings.
See
“General Settings” on page 78.
Service
- Opens the menu for scanner services, like firmware updates, backups or
viewing errors and warnings.
See “Service” on page 87.
Sensors
- Opens the menu for the scanner sensors administration.
See “Sensors”
on page 94.
Shut down Scanner
- Click to shut down the scanner.
See “Shutting Down the
Focus
3D
X 130” on page 58.
Managing Scan Projects
(Home > Manage > Projects)
Before starting with your scan project you should map this project to the
controller software of the scanner by dividing the project into several appropriate
sub projects or clusters. For example, if you are scanning a multi-level building,
each floor of this building might represent a sub project or cluster of the scan
project „Office Building“. Each of these floors or sub projects might have further
sub projects, e.g. rooms. The structure of the scan project might then be like this:
- Office building
- Floor 1
- Room 1
- Room 2
- Room 3
- Floor 2
- Room 1
- Room 2
etc.