Faro FOCUS3D X 130, User Manual

Page: 23 / 190

FARO
®
Laser Scanner Focus
3D
X 130 Manual
January 2014
14
Chapter 3: Safety Precautions and Maintenance
Transport
• When carrying the Focus
3D
X 130, take care not to drop it. Strong impact may
damage the Focus
3D
X 130 and render it incapable of proper operation.
• Carry the Focus
3D
X 130 separately from its equipment or - for best protection
- use the original transport case.
• When shipping and transporting the Focus
3D
X 130 by rail, sea, air, or in a road
vehicle, make sure to use its original transport case and a suitable outer
cardboard box for best protection against shock and vibration.
•
N
OTE
: The FARO PowerBlock batteries are Li-Ion batteries and are thus
classified as "dangerous goods". When transporting or shipping the
PowerBlock batteries, please ensure that you observe the applicable and
international rules and regulations. For further information, please contact your
local forwarder before transportation or shipping.
• For Li-Ion batteries with less than 100 Wh energy content, an exemption is
provided that allows you to carry such a battery without further paperwork.
The maximum Li-Ion battery energy a single person may carry is 200 Wh.
N
OTE
: Please make sure that the total energy content of all Li-Ion batteries that
you (as a single person) carry is less than 200 Wh and that no single battery has
more than 100 Wh energy content.
•
N
OTE
: The Focus
3D
X 130 must be turned off during transportation or
shipping in a transport case. Please remove the battery from the Focus
3D
X 130
before shipping.
Storage
Prior to storing the Focus
3D
X 130 for a longer time, remove the battery. Pack the
scanner and the battery in its shipping case to protect it from environmental
hazards, dust, and dirt. Store all components in an environment where the
humidity level is low, the temperature is relatively stable, and where they will not
be subject to extreme temperatures, environmental conditions, or heavy
vibrations.