Faro FOCUS3D X 130 User Manual Download Page 86

Page: 86 / 190

FARO

Laser Scanner Focus

X 130 Manual

January 2014

Chapter 6: The Focus

X 130 Controller Software

To delete an operator, select it and click the

delete button

Name

- The name of the scanner operator.

Company

- The name of the company providing the scanning service.

Department

- The department the operator works for.

Phone

- The operator's phone number.

Email

- The operator's email address.

Info

- Any additional information required by the service provider. This may be

shift leaders, project managers etc.

Editing an Operator

To edit an operator, select it in the list and touch it once again to reach to its
details.

Figure 6-15 Operator Details

Summary of Contents for FOCUS3D X 130































































































































































































Search results

Summary of Contents for FOCUS3D X 130

Reviews:

Related manuals for FOCUS3D X 130

Brands by name

Popular brands

Faro FOCUS3D X 130, User Manual

Search results

Summary of Contents for FOCUS3D X 130

Reviews:

Related manuals for FOCUS3D X 130

Brands by name

Popular brands