Video settings
Video settings
Changes to default
Video Resolution
4K (3840x2160) 30 FPS
Microphone Volume
OFF
11. On the Camera Settings sub-page make the following:
Camera Settings
Camera Settings
Changes to Default
LCD brightness
LOW (to save battery life)
Auto Shutdown
3 Min
Screen Off
OFF
Time Setup
Change as Required
Language
Change as Required
12. Press the Power/Mode button to exit the settings page.
13. Long press the Power/Mode button to power the camera off.
14. Refit the camera in the frame.
15. Reconnect the cable assembly to the camera mini USB B socket.
16. Push the camera and cable assembly into the camera frame.
17. Push the cable boot up into the camera frame.
18. Slide the back cover up into place.
19. Refit the single screw on the back face of the camera using a T10 Torx screwdriver.
20. Refit the fixing screw in the base of the camera using a 4mm hex key.
21. Refit the lens protection cowling from the front of the camera.
22. Install the SD card in the camera.
23. Test the camera by connecting the camera cable to the ZEB Horizon scan head and initiating a scan. The camera
should start recording when the scan starts (scan head rotations starts).
24. Refit the scanner frame to the scan head using the 4 M4 x 10 screws.
https://knowledge.faro.com/Hardware/GeoSlam/ZEB_Accessories/ZEB_Horizon_ZEB_Cam_Firefly_8SE_reset
Updated: Fri, 29 Dec 2023 19:24:15 GMT
5
