Faro
STEAM Plus
Pag. 7 di 9
The correct way of use is as follows:
- Heat the Thermo Mop for 3 seconds at speed 3
- Set the steam to speed 1
- Generate steam for about 1 second every 2 seconds in order to
maintain the temperature of the Thermo Mop.
- Replace the Thermo Mop when it is wet and leaves halos.
The Thermo Mop is made of high quality material designed to
work at high temperatures and be washed up to 500 times at 90
° C.
3.1.3
Sanix
Sanix contains 0.5 lt of liquid and must be used at speed 3.
The flow of steam in the upper part generates a venturi effect
and the liquid is delivered together with the steam.
Different detergents can be inserted inside Sanix depending on
the result you want to achieve.
The liquid is slightly superheated in contact with the steam,
when it reaches the surface it will be almost at room
temperature.
Sanix creates a jet of about 1 meter with a diameter of 30 cm.
Use it at a distance of about 50/70 cm from the surface in order
to have an homogenous distribution.
3.1.4
Optional Accessories
7. Floor brush: can be used directly or with PAD
and Thermo Mop. Same function as the triangular
brush
8. Rectangular pad
9. Extensions: applicable to lengthen the range of
action of the accessories.
10. Abrasive pads: can be used with brushes to
perform an abrasive cleaning action
11. Sink plunger: used at speed 3 to clean and clear
the drain pipes.
12. Brush diam. 30/60 mm
13. Silver spear
