1
OPERATING INSTRUCTIONS
FOR PREPROGRAMMED REMOTE
CONTROLS BY BRAND
GR-
9200
BRANDS OF THE GRUNDIG - BLAUPUNKT - MINERVA
SIEMENS - LOEWE - METZ GROUP
DESCRIPTION
1. LED indicator.
2. Access to “secondary functions”.
3. Access to Teletext functions
(only on some models).
4. Switch key to access additional
memory for copying functions
by the learning procedure.
5. Main functions and code entry keys.
6. TV: On/Off or access to the
automatic Device-Code search.
7. VCR: Play or access to the
automatic Device-Code search.
8. Internal RESET key
(to be used only in the specified cases).
9. Key to initialize programming,
search or code visualising
procedures.
Fig. 1
RAPID SET-UP
HOW TO MAKE YOUR REMOTE CONTROL FUNCTION IMMEDIATELY
OPEN THE BATTERY COVER AND INSERT 2 NEW ALKALINE BATTERIES, TYPE AAA/LR03 1,5V AND
CLOSE THE BATTERY COVER.
•
SWITCH THE TELEVISION SET ON.
•
OPEN THE FRONT COVER OF THE REMOTE CONTROL, PRESS AND RELEASE THE «CODE» KEY AND ENTER
•
POINT THE REMOTE CONTROL TOWARDS THE TV SET.
•
PRESS AND KEEP PRESSED THE ON/OFF KEY.
• RELEASE
IMMEDIATELY THE ON/OFF KEY ONCE THE TV SWITCHES OFF.
•
CHECK THAT THE REMOTE CONTROL OPERATES THE MAIN FUNCTIONS.
•
IN THIS CASE
•
THE UNIT IS READY.
•
OTHERWISE REPEAT AGAIN PROCEDURE.
TO KNOW MORE…
TO MAKE THE BEST USE OF YOUR NEW REMOTE CONTROL WE RECOMMEND THAT YOU READ IN FULL AND
RETAIN THESE INSTRUCTIONS
N.E. GR 9200 (GB) 13-07-2000 11:56 Pagina 1
