45
WARNING:
!
1. During servicing be utmost careful when in contact with sulphuric acid (pour acid
into water) to prevent contamination of the body, clothing or other objects. If such
contamination occurs, immediately flush the contaminated spot with water
liberally and neutralize with 2,5% solution of borax and water. The electrolyte
should be prepared using protective clothing and glasses.
2. Do not approach the battery with an open fire and avoid situations leading to
short-
circuit or “flashing” as explosion is likely to occur.
5.4.4. Spot lights adjustment.
Regarding the safety of road traffic the front headlights adjustment should be executed in authorized
service depot.
5.4.5. Bulb and fuse - replacement.
Be sure of correct power of installed bulb. Disconnect the main earth switch before bulb change.
NOTE:
Do not replace blown fuse with another of a different capacity
The fuses are placed in a box located under the instrument panel. Remove the plastic cover to gain
access to the fuses.
Fuses location in fuse box is specified in table No. 8 .Table No. 9 describes bulbs specification.
Table 8
Fuse location in fuse box
12
11
10
9
8
7
6
5
4
3
2
1
13
14
15
16
Fuse No.
Electric circuit
Capacity
1
Headlights (main beam)
15A
2
Headlights (dipped beam)
15A
3
Marker lights
15A
4
Fuel supply control device
Glow plugs relay
10A
5
Front air blower
10A
6
Indicator lights
10A
7
Stop lights, gauges and warning lamps
10A
8
Horn, windscreen wiper and washer
10A
9
Blower (in the roof), rear window wiper, illumination of switches, 7 pin
socket
10A
10
Work lamps
25A
11
Work lamps
25A
12
Relays of main and dipped beam
25 A
13
Flame / Glow* plug
25 A
14
Hazard warning lights, cab lighting, radio
15 A
15
Work lamps
25A
16
Work lamps
25A
* 70 A capacity fuse is located in separate box .
