7
F a r m T e k ®
If you have any questions, please call
us toll free at 1-800-FARMTEK.
4. Attach the remaining screws and washers using the
diagram below as a suggested guide.
NOTE:
For the best results, the maximum distance
between the screws must not exceed 12'.
5. Once all screws with washers are installed, grasp the
end of the anti-billow rope and tie it to one of the upper
screws at either end of the building or frame. See the
pattern and arrows above.
6. Weave the rope between each screw and washer as
shown and work to the other end. Install the rope in
short sections. This helps secure the roll-up panel
should one rope break.
7. Raise and lower the curtain to check the operation.
12'
Tie end
of rope
here to
begin rope
installation.
Building shown may differ
from actual building.
Space below is reserved for customer notes.
INSTALL ANTI-BILLOW ROPES (continued)