8
Revision date: 05.01.19
Assembly Instructions
Arrange a few of the buckets on the bench (at the drain end) by
inserting the drain fitting of each into a hole in a return line. Verify
that the buckets are in the desired position and that all return lines
are running parallel with each other.
Continue by connecting the return lines to complete the return
line plumbing. In this example, a hole was cut in the bench top to
allow the return lines to drain. Measure the required length of the
remaining straight PVC tubing and cut as needed.
Remove the buckets to allow for the final assembly of the return
lines. Apply the PVC cement and connect the fittings. Do not set the
buckets back in position until the supply lines are assembled and
installed as described in the next procedures.
3
2
5
1
4
6
7
8
5