MINI BRUTE
™
FEED BUNKS
8
Revision date: 09.03.08
6
Gather six (6) one-way plates (#104624), two (2) 92" lengths of square tube, and one (1) 96" length of
square tube.
Complete the following steps inside the frame for easier assembly.
Slide a one-way plate onto each end of each tube. Do not attach yet.
With the assembled pieces in the center of the frame as shown below, verify that the plates at each end
panel are over the end panels. Secure to the bottom tube with Tek screws. Secure the inner plates to the
center tubes with Tek screws.
ATTENTION:
The 96" tube will be attached in the middle
After the plates are secure on each side, secure each tube to the one-way plates using Tek screws
positioned on each side of the plate or fitting slot.
Tek screws
Tek screws
Tek screw
92" Tube
92" Tube
96" Tube
ATTENTION:
Diagram
shows the frame as viewed
from the bottom for clarity.
TOP
VIEW
92"
Tube
96"
Tube
TOP
VIEW