POLY BUILDINGS
22
Revision date: 03.15.12
5. With the panel secured along the bottom, loosen the
temporary clips and stretch the end panel up and over
the end rafter. (Additional assistants are needed to
keep the panel evenly stretched.)
6. Attach the fabric clips to secure the end panel to the
rafter. Evenly space the fabric clips at 24" intervals.
Keep the panel evenly stretched as you work along the
rafter.
7. Move to the door frame for the overhead door and
secure the end panel to the jambs and header. Evenly
space the screws and washers around the perimeter of
the door frame on the outside of the frame.
NOTE:
Installing Tek screws and washers through the
end panel and into the frame
before cutting the door
opening
helps keep the panel tight. See dashed lines.
8. After installing both end panels, return to the door
end of the frame and cut the opening for the roll-up
overhead door.
END PANEL INSTALLATION (continued)
Space below is reserved for customer notes.
View from inside
the frame.
