3
Revision date: 06.27.11
CARTS AND WAGONS
Parts List and Tools Required
Wheels (4)
To better align the cart, do not fully tighten
the nuts and bolts until the entire cart is
assembled.
NOTE:
Hardware may ship attached to parts.
Photos used in these instructions are not to
scale.
1. Remove lock nut and washer from each
end of the axles (if needed). Slide axles
through the holes of the main frame as
shown in diagram A.
2. Slide one (1) wheel, 12mm flat washer,
and 12mm locknut in that order onto each
end of both axles as shown in diagram B.
Do not over tighten the nuts, wheels spin
freely
.
1
INSTALL AXLES AND WHEELS
Flat washer and locknut are used
on the outside of the wheel.
Install
the wheel with the valve stem to the
outside.
Main Frame (1)
Axles (2)
12mm Flat Washers (4)
12mm Locknuts (4)
Axles
B
Axle
A
Socket/Wrench Set
Pliers
Flat Head Screwdriver
