![background image](http://html.mh-extra.com/html/farmtek/112664/112664_assembly-and-installation-instructions-manual_545445002.webp)
2
Revision date: 12.23.15
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the aquaponics system. Additional tools
may be needed.
• Tape measure and marker
• Variable speed drill (cordless with extra
batteries works best)
• Small hammer and gloves
• Level (4'– recommended) and line level
• Utility knife or scissors
• Tool to cut pvc tubing
• Assorted hand tools common to construction,
plumbing, and electrical work
• Drill bit set with assorted bits
• Large adjustable pliers (3"-4" jaw)
READ THIS DOCUMENT BEFORE YOU BEGIN
Thank you for purchasing the 112664 Aquaponics system. When properly assembled and maintained, this system will provide years of reliable service. These
instructions include helpful hints and important information needed to safely assemble and properly maintain the system. Please read and understand these
instructions
before
you begin. If you have any questions during the assembly, contact customer service.
ASSEMBLY PROCEDURE
Following the instructions as presented will help
ensure the proper assembly of your aquaponics
system. The steps outlining the assembly process
are as follows:
1. Verify that all parts are included in the
shipment. Notify customer service for
questions or concerns. See below.
2. Read and understand these instructions and
the information included with the shipment
before
you begin.
3. Gather the tools and assistants.
4. Assemble the system.
5. Read the maintenance and additional
information provided near the back of this
guide.
Important Information
SAFETY PRECAUTIONS
• Wear eye protection.
• Wear gloves when handling metal pipes.
• Use a portable GFCI (Ground Fault Circuit
Interrupter) when working with power tools and
cords.
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all
the necessary parts
before
you begin assembly.
1. Unpack the contents of the shipment and
place where you can easily inventory the
parts. Refer to the Bill of Materials/Spec
Sheets.
2. Verify that all parts listed on the Bill of
Materials/Spec Sheets are present. If anything
is missing or you have questions, consult
the Pictorial Parts Guide and all diagrams for
clarification, or contact Customer Service.
NOTE:
At this time, you do not need to open
the plastic bags containing smaller parts
such as fasteners or washers (if equipped).
WARNING:
Enlist the services of an
experienced electrician when connecting
power to the pump and other electrical
devices.
All wiring to be completed according to
established codes and practices.
DROWNING HAZARD:
Never allow
children or others within the boundary of
the tanks, float bed, and pump station at
any time.
Always have an assistant present during
tank cleaning and system maintenance to
prevent accidents.
This manual describes how to set up your
aquaponics system and check for proper
operation. Additional information is presented
regarding the basic maintenance of the
system. This manual does not however
describe how to grow various types of fish
and plants. Since the specifics of such an
undertaking would fill many books—and they
have—it is best to determine beforehand
exactly how you want to use this system.
Water quality, location, growing environment,
available resources, personal knowledge
and experience among other things all
must be considered before populating your
system with fish. Consult with your sales
representative for additional resources and
information to ensure a successful start.
ABOUT THIS MANUAL