7
Revision date: 04.13.12
CARTS AND WAGONS
Parts List and Tools Required
3
BED ASSEMBLY (continued)
6. Align the holes of the front axle assembly with the
four holes remaining on the wagon bed frame.
7. Secure in place using four (4) M8x18 hex bolts, M8
flat washers, and M8 locknuts as shown diagram B.
8. Slide handle coupler between ends of the yoke.
Position the handle as desired and slide handle end
into handle coupler. Align all holes.
9. Insert M8x60 bolt through all three parts and secure
with a M8 flat washer and M8 locknut as shown in
diagram C. Do not overtighten the locknut.
10. Tighten all connections and turn wagon onto its
wheels.
Periodically check connections to make sure
they are tight and secure
.
11. Check tire pressure and adjust as needed.
B
Handle Coupler
Yoke
Bolt
Washer &
Locknut
Slightly tighten
bolt so the handle
pivots freely.
C
Front Wheel Assembly
Socket/Wrench Set
Pliers
Flat Screwdriver
M8 Locknuts (5)
M8 Washers (5)
M8x18 Hex Bolts (4) M8x60 Hex Bolt (1)
Handle Coupler (1)
Handle (1)
Handle can be removed to
expose a pin connection
that will attach to receiver of
motorized vehicle. If hand
grip is removed, place in a
safe place for future use.
