![background image](http://html.mh-extra.com/html/farmtek/105659/105659_quick-start-manual_545411009.webp)
CLEARVIEW
™
PANELS
Visit
www.ClearSpan.com
for additional products and customer assistance.
PANEL OPERATION
To roll the panel up, pull all the cords at once.
1.
When the panel is at the desired height, wrap the cords
around the rope cleat in a figure ''8'' pattern.
2.
Coil any remaining cord and hang it on the rope cleat.
Warning:
Do not let children play with the cord.
3.
When the panel is unrolled, the sides of the panel may
be attached to the frame with screws and washers or
snugger tie-downs for a more weather-tight fit.
NOTE:
If the frame is metal, use a self-drilling Tek
screw with a fender washer. If the frame is wood, use
a non-corrosive wood or decking screw with a non-
corrosive flat washer.
4.
CARE AND MAINTENANCE
Your ClearView™ panel will provide years of trouble free
service. To protect your investment follow the tips below.
To remove fine dust from the panel, spray a liquid
window cleaner on it and wipe with a soft cloth. Do not
wipe the panel with a dry cloth.
To reduce static electricity in the panel, lightly wipe it
with a clothes dryer anti-static sheet.
To remove mud or dirt from the panel, spray it with
water from a garden hose and wipe with a soft cloth.
Do not roll the panel up when wet. Allow the panel to
remain unrolled until it air-dries.
Do not allow the panel to remain rolled up when heavy
rain or snow is expected. Unroll the panel and secure it
to the frame.
Secure the panel to the frame if high winds are
expected.
•
•
•
•
•
•