manualshive.com logo in svg

FarmTek 105356, Manual

Share
Download
FarmTek 105356 Manual Download Page 3

3

Revision date: 10.22.10

           CHICK-INN 

LAYING 

NEST

Parts List and Tools Required

Notch

Square 

Hole

Square 

Hole

Panel with Notches (1)

Socket/Wrench Set

NOTE

: There are different panel types. 

Panels with square holes and panels without. 

Panels with notches and panels without. 

Note 

location of each panel in all the photos. 

Position the angled edges of the left and right 

side panels toward the center panels.

Starting from the front side of the nest, attach 

the lower front panel (with holes) to the side 

panels and partitions as shown. Secure in 

place using twelve (12) machine screws and 

hex nuts. 

 

The front panel has notches and must be 

installed as shown with the lip of the panel 

facing up.

 

Machine screw heads go to the 

outside of the laying nest. 

1

ATTACH LOWER FRONT PANEL

Flat Screwdriver

Right Panel (1)

Left and Center 

Panels (5)

10-24X1/2 machine screws (12) 

& 10-24 hex nuts (12)

Front Panel 

with Notches

Right Panel

Left Panel

Center 

Panel

Center 

Panel

Center 

Panel

Center 

Panel

Square Hole

Notch

Right 

Panel

Lip faces up

Bottom

Machine 

Screw

Machine 

Screw

Front Panel 

with Notches

*Items not to scale.

Summary of Contents for 105356












Reviews:

No comments

Brands by name

Popular brands

Load more brands