STEP 4
4
A.
B.
C.
Power on your new camera:
There are four cables coming out the
back of the camera (as below).
Connect the power cable to the
power lead coming out the back of
the camera. This will be the 3-pin plug
adapter if powering the camera via
mains or this will be a 12V battery
connection cable if powering the
camera via a 12V battery.
Hold the camera by the mount and
plug into power (the camera will
rotate during the start-up process
and to prevent damage, it is best to
hold the camera by the mount).
Connect the black speaker to the
audio out connector lead coming out
the camera.
Ethernet
port
Reset
button
Audio
out
12V DC
power in
A.
B.
C.
STEP 5
Connecting your camera to the CamHiPro app:
Use your mobile phone to access the App / Google Play store
and download a free app called ‘CamHiPro’.
Once downloaded, open CamHipro and give it full permissions.
The following steps can be used to connect your 4G 360 to the CamHiPro app:
1.
Select
'Add Camera'
2.
Select
'IP Camera'
3.
Select
'Device in Use'
4.
Select
‘Scan QR code’
and scan the QR code
on the side of the camera
©Farmstream LTD 2024