7
DOCU-M0106 05-10
AM-2188 v4 09-19
7.0 TROUBLESHOOTING & WARRANTY
PROBLEM
POSSIBLE CAUSE/ REMEDY
Unit does not turn on
Check battery is connected properly.
The meter displays 99.9 at all times.
Clean probe tip and calibrate moisture
meter.
“LOBAT” is displayed
Replace the battery with a new 9 Volt
Alkaline battery. Re-calibrate moisture
meter.
Hay moisture meter will not display 00.0
in open air.
OR
Open air reading of 8.0 is displayed.
Clean probe tip and calibrate moisture
meter
Temperature not readings accurate.
Make sure you allow the metal tip of the
probe to adjust to the bale temperature.
This can take a minute or two.
Unit reading inaccuratley
Calibrate Unit.
WARRANTY
Farmscan Pty Ltd “Farmscan” guarantees to correct by repair or parts replacement, without
charge, any defect arising from faulty workmanship or materials.
The period of this guarantee is (1) one year.
Farmscan Guarantee is subject to the following conditions:
•
Faulty equipment must be returned to Farmscan or an authorised repair center at the
owner’s expense and at the owner’s risk.
•
If gurantee valid, Farmscan may pay the cost of return freight using its nominated carrier at
owner’s risk.
•
Commencement date of Guarantee will be from date of registration on the warranty card.
•
Guarantee card must be lodged within ten days of purchase for registration to be accpeted.
•
Equipment returned for repair that is not registered for guarantee purposes will have the
guarantee period calculated from the original date of despatch from Farmscan.
•
Repairs to equipment will be charged if the guarantee period has expired of if fault caused
by damage or misuse.
•
If equipment is tampered with by unauthorised persons, then this guarantee is void.
•
Our full warranty & liability statement is available on request or on our website:
www.farmscan.com.au.
