Farmi Forest CH18 PTO, Operation And Maintenance Manual

Page: 7 / 52

CH18
7
GENERAL SAFETY INSTRUCTIONS
These safety instructions are meant for the owners of FARMI attachment, as well as those who operate, service
or repair it.
The instructions help with:
1. using the attachment safely, appropriately, and effectively.
2. identifying, avoiding, and preventing potentially dangerous situations.
The manufacturer supplies an operation manual, which must always be available at the place of operation of the
attachment. Each user must read the safety, maintenance, and operating instructions before operating the
attachment, and comply with these instructions at all times.
Ensure that every operator of the attachment is familiar with the content of the
operation manual and situation-specific safety instructions and has been suitably
trained before operating the attachment.
WARNING
The attachment complies with technical requirements and applicable safety regulations. However, incorrect use,
maintenance or repair of the attachment may cause risks.
In addition to the operation manual, remember to comply with regulations of the local occupational health and safe-
ty authorities, and with your country’s laws and decrees.
The manufacturer is not liable for damages caused by:
CAUTION
1. Incorrect, negligent or inappropriate use of the product
2. Non-original spare parts
3. Normal wear and tear
4. Misuse caused by an untrained person’s improper actions
5. A lterations made without the manufacturer’s permission
Written authorization must be requested from the manufacturer for any
alterations to the attachment.
WARNING
STARTING
Please read the operating instructions carefully before using, maintenance or
repairing the attachment. Observe all operating and safety instructions
whenever using the attachment.
WARNING
1. Familiarize yourself thoroughly with the use, operation and controls of the attachment and its equipment
before starting.
2. Familiarize yourself with the capacities and limitations of the attachment and its equipment.
3. Do not use the attachment unless you are completely familiar with its operation.
4. Be aware of the attachment ’s danger zones.
5. During operation, prevent bystanders from entering the danger zone. If necessary, work must be stopped.