manualshive.com logo in svg

Farmi Forest Corporation JL 351P, Operation, Maintenance And Spare Parts Manual

Share
Download
Farmi Forest Corporation JL 351P Operation, Maintenance And Spare Parts Manual Download Page 37

Farmi Forest Corporation
Ahmolantie 6
FIN-74510 IISALMI
FINLAND

Farmi Forest Oy grants a 12-month warranty on all of its products, covering 
material and manufacturing faults. The warranty comes into effect on 
the product’s delivery date. 

The manufacturer is not liable for damages caused by:

misuse of the product
alterations or repairs made without the manufacturer’s permission

LQVXI¿FLHQWPDLQWHQDQFH

non-original parts

The warranty does not cover wearing parts.

Send faulty parts, carriage paid, to the manufacturer for inspection. Repairs will 
be conducted by Farmi Forest Oy or an authorized expert. The warranty is valid 

RQO\LIWKHERWWRPSDUWRIWKLVSDJHLV¿OOHGLQDQGUHWXUQHGWRWKHPDQXIDFWXUHU

within 14 days of receipt of the product.

%\UHWXUQLQJWKHZDUUDQW\FHUWL¿FDWH\RXFRQ¿UPWKDW\RXKDYHUHDGDQG

understood the instruction manual that came with the product.

•
•
•
•

WARRANTY

Summary of Contents for JL 351P









































Reviews:

No comments

Brands by name

Popular brands

Load more brands