Farmet Triolent TX 300 N, Operating Manual

Page: 17 / 22

Manual
TRIOLENT TX 300 N | TX 350 N
17
│
22
8. MACHINE LUBRICATION SCHEDULE

During machine maintenance and its lubrication, it is necessary to observe the safety regulations.
Tab. 4
LUBRICATION POINT INTERVAL LUBRICANT
Disc bearings
- Daily, always before the work with the machine.
- Always after the end of works during machine storing.
- Always before storing the machine (for a period, when the
machine will be stored without work).
Plastic grease
Rear roller bearings
Lubricant handling:
Protect yourselves against direct contact with oils by using gloves or protective creams.
Thoroughly wash oil spots on the skin using warm water and soap. Do not clean the skin with petrol,
engine diesel fuel or other solvents.
Oil is poisonous. If you swallowed the oil, immediately seek a physician.

Protect the lubricants against children.
9. ENVIRONMENTAL PROTECTION
 Handle oils and greases according to valid waste laws and regulations.
10. MACHINE DISPOSAL AFTER SERVICE LIFE EXPIRY

The operator must secure during machine disposal that steel parts and parts, in which hydraulic oil or
lubricating grease moves are differentiated.

Steel parts must be cut by the operator while observing safety regulations and handed over to the secondary
raw material collection point. He must proceed with other parts according to valid laws about waste.