Manual
SOFTER 8 PS | SOFTER 11 PS
19
│
29
Tab.6 – Transport position of the machine
Machine Folding Procedure – Transport Position
Initial position: The machine is unfolded and recessed, both ball valves outside are opened.
1
Lift the machine on the rollers (or
rollers and drawbar), i.e. draw out
the piston-rods of rollers (drawbar)
using the yellow circuit into the
marginal position, i.e. maximum
release.
Lift the machine on the axle, i.e.
draw out the piston-rods of the axle
using the green circuits into the
marginal position, i.e. maximum
release.
2
Close the ball valve of the circuit of
the central roller – axle (lower) and
fold the machine using the red
circuit.
3
Close the ball valve of the folding
circuit (upper) and draw in the
piston-rods of the side rollers using
the yellow circuit into the marginal
position, i.e. maximum retraction.
Note: As for SOFTER 11PS, the
piston-rods of the side rollers are
automatically drawn in when the
machine is folded.
Secure the side frames with the
securing drawbar and belt. The
machine is ready for transport.
Warning!!! The machine must only be transported by the axle, not rollers
.
