9
|
39
2 GENERAL INSTRUCTIONS FOR USE
•
The machine is made in accordance with the latest equipment state and approved safety
regulations. However, dangers of user or third person injury or machine damage or
creation of other material damage may arise during use.
•
Use the machine only in a technically sound condition, in accordance with its purpose,
aware of possible dangers, and while adhering to the safety instructions of this operating
manua !!!
The Manufacturer is not liable for damages caused by the use of the machine that is in
contradiction with the limit parameters of the machine and with the instructions for the
use of the machine (Chapter 2 and 8). The User bears the risk.
Immediately remove especially the failures that may negatively affect safety!
•
Machine operation may be performed by a person authorised by the operator under
these conditions:
•
It must own a valid driver's licence of the corresponding category,
•
It must be demonstrably familiarised with the safety regulations for work with the
machine and must practically master the machine operation,
•
The machine may not be operated by juveniles,
•
It must know the meaning of the safety signs located on the machine. Their respecting
is important for safe and reliable machine operation.
•
Maintenance and servicing repairs on the machine may only be performed by a person :
•
Authorised by the operator,
•
Educated in the machinery field with knowledge of repairs of similar machines,
•
Demonstrably familiarised with safety regulations for work with the machine,
•
During a repair of a machine connected to a tractor, it must own a driver's licence of
the corresponding category.
•
Machine operator must secure the safety of other persons when working with the
machine or transporting the machine.
•
During machine work in the field or during transport, the operator must control the
machine from the tractor's cabin.
•
The operator may enter the machine structure only with the machine at rest and blocked
against movement, namely only for these reasons:
•
Adjustment of the machine working parts,
•
Repair and maintenance of the machine,
•
Release and securing of spherical valves of the axle,
•
Securing of spherical valves of the axle before folding the side frames,
•
Adjustment of the working parts of the machine after unfolding the side frames.
•
When climbing on the machine, do not step on the axle tyres, rollers, discs or other
revolving parts. Those may turn and you can cause very serious injuries by the subsequent
fall.
•
Any changes or modifications of machine may be performed only with written consent of
the manufacturer.
For possible damage arisen due to ignoring this instruction, the producer bears no
responsibility.
The machine must be maintained equipped with prescribed accessories and equipment
including safety marking.
All warning and safety signs must be legible and in their places. In case of damage or loss,
these signs must be immediately renewed.
