Manual
SOFTER 12,5 PS
46
│
54
7.3.
TRACING WHEEL POSITION
The bearings of the tracing wheels may be mounted to different positions on the frame
The factory setting is used according to the selected roller
SDR, DVR rollers – position4
DRR roller – position3
The setting may have to be adjusted according to the conditions
The setting must correspond to the number of washers on the drawbar and the tractor hitch height
7.4.
ROLLER POSITIONS
The roller bearings may be mounted in different positions on the side plates
The factory setting is set at the central position (position 2)
The setting does not usually need to be changed
1
2
3
4
Picture 15 Setting the tracing wheels
1
2
3
Picture 16 Setting the roller positions
