9.4 Setting levelling
9.4.1 Levelling pressure
The rear levelling row can be adjusted in the following areas:
• DOWN PRESSURE OF LEVELLING
• SETTING OF FLEXI-BOARDS
• ANGLE OF LEVELLING
The process of changing the down-pressure of rear levelling:
1 – Remove the spring pin and move the lever
out of the bearing
2 – Place the lever along the longer side of the
handle
3 – Moving the lever :
•
BACKWARD - increasing pressure
•
FORWARD - reducing pressure
45
|
61
Summary of Contents for FANTOM 650 PRO
Page 2: ...2 61 Prepared by Technical Department Farmet a s on 31 05 2017 changes reserved...
Page 4: ...PREFACE 4 61 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE...
Page 17: ...WORK SAFETY LABELS FANTOM 800 PRO FANTOM 850 PRO 17 61...
Page 31: ...COMMISSIONING Machine position for folding Machine position for unfolding 31 61...
