9.3 Setting the levelling disc
The height of the disc can be set by adjusting from the ground. The surface of the soil must be level
when the discs pass. Setting the disc levelling is done as follows:
1 – Pull out the pin with ring
2 – Pull the pin out
3 – Grab the disc holder by hand
4 – Set the required height of the disc and
insert the pin back
5 – Securing the pin with a spring pin with ring
44
|
61
Summary of Contents for FANTOM 650 PRO
Page 2: ...2 61 Prepared by Technical Department Farmet a s on 31 05 2017 changes reserved...
Page 4: ...PREFACE 4 61 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE...
Page 17: ...WORK SAFETY LABELS FANTOM 800 PRO FANTOM 850 PRO 17 61...
Page 31: ...COMMISSIONING Machine position for folding Machine position for unfolding 31 61...
