Farmet FALCON 3, Operating Manual

Page: 7 / 99

Manual
FALCON 3 | 4 | 6 | 8
7
│
99
2 CRITICAL PARAMETERS OF THE MACHINE

The machine is designated for sowing common cereals and broad-line cultures in aggregation with an
agricultural wheel or caterpillar tractor. Another type of use exceeding the determined purpose is forbidden.

(x)
The machine is only operated by one person – the tractor driver.

(x)
The operator must not use the machine for other purposes, particularly:

(x)
For transporting people and animals on the construction of the machine,

(x)
For transporting load on the construction of the machine,

(x)
Aggregation of the machine with other tractive equipment than stated in Chapter „6.1./P.18“.
3 TECHNICAL PARAMETERS
Tab. 1 – Technical parameters of the machine
PARAMETERS FALCON 3 FALCON 4 FALCON 6 FALCON 8
Working width (mm) 3000 4 000 6 000 8 000
Transport width (mm) 3 000 3 000 3 000 3 000
Transport height (mm) 3 300 3 300 3 300 4 000
Total length of the machine (mm) 7 500 7 500 7 500 7 500
Working depth (mm) 0 – 100 0 – 100 0 – 100 0 – 100
Container capacity without fertilization ( l ) 4000 4000 4000 4000
Container capacity with fertilization ( l ) (ratio 40 : 60) 6000 6000 6000 8500
Filling height of the container (mm) 2650 2 650 2 650 3 400
Dimensions of the filling opening w/out fertilization (m) 2x0,52 / 1,2x0,52 2x0,52 / 1,2x0,52 2x0,52 / 1,2x0,52 2x0,52 / 1,2x0,52
Number of drill coulters (spacing 125 / 150 mm) 24/20 32 / 26 48 / 40 64 / 52
Number of fertilizer boots (spacing 250 / 300 mm) 12/10 16 / 13 24 / 20 32 / 26
Pressure of drill coulters / fertilizer boots (kg) 50 -115 / až 200 50 -115 / až 200 50 -115 / až 200 50 -115 / až 200
Diameter of the sowing disk, two-disk coulter / press-wheel
(mm) 355 / 340
355 / 340 355 / 340 355 / 340
Diameter of the sowing disk, single-disk coulter / press-
wheel (mm) 410 / 690
410 / 690 410 / 690 410 / 690
Number of discs

490
Front 12 16 25 34
Rear 11 15 24 33
Number of chisels of 2-row section, depth 200mm
(spacing 250 / 300 mm)
12/10 16 / 13 24 / 20 32 / 26
Number of chisels of 3-row section, depth 200mm
(spacing 250 / 300 mm)
12/10 16 / 13 24 / 20 32 / 26
Number of chisels of 2-row section, depth 300mm
(spacing 375 mm)
8 16 24 32
Working capacity (ha/h) 3 - 4,5 4 – 6 6 - 9 8 - 12
Pulling vehicle (kW) 92 / 125 117 / 160 * 161 / 220 * 205 / 280 *
Working speed (km/h) 10 – 20 10 – 20 10 – 20 10 – 20
Maximum transport speed (km/h) 25 25 25 25
Maximum slope accessibility (°) 6 6 6 6
Tyre dimensions 405/70-20 405/70-20 405/70-20 405/70-20
Type of brakes / distribution 1) air / two-line*** air / two-line*** air / two-line*** air / two-line***
Required pressure (kPa) 8,5 8,5*** 8,5*** 8,5***
Number of hydraulic circuits / pressure (bar) 9 / 200 3 / 200 3 / 200 3 / 200
Number of quick-coupling devices / type 5 / ISO 12,5 5 / ISO 12,5 5 / ISO 12,5 5 / ISO 12,5
Non-pressure return line (max. 5 bar) 1 / ISO 20 1 / ISO 20 1 / ISO 20 1 / ISO 20
Hydraulic fan oil flow ( l/min) 30 - 40 30 - 40 30 - 40 30 - 40
Oil flow for machine control (l/min) 50 - 60 50 - 60 50 - 60 50 - 60
Electric system requirement 12 V DC / 40 A 12 V DC / 40 A 12 V DC / 40 A 12 V DC / 40 A
Tractor suspension requirement TPS kat. 3 TPS kat. 3 TPS kat. 3 TPS kat. 3
Machine weight without fertilization (kg) 4 830 – 5840** 5 340 – 6 580** 6 800 – 8 000** 8 440 – 9 950**
Machine weight with fertilization (kg) 5 630 – 6140** 6 630 – 8 420** 8 000 – 9 860** 9 600 – 12 100**
* recommended pulling vehicle, the actual pulling force may significantly change according to the selected version of the machine, processing depth, soil
conditions, inclination of land, wear and tear of the working parts and their adjustment
** weight of the machine according to accessories
*** hydraulic brake alternative / operating pressure 130±5 bar
Technical Advice!
1)
Transport/Brake System: Follow the national regulations valid for transportation of machines on public roads. Check
the legal provisions valid in the country and regulations on maximum permissible total axle weights and loads and also
on the necessary potential use of a brake system. If you have any further questions, please contact our sales
representative.