Farmet FALCON 3, Operating Manual

Page: 45 / 99

Manual
FALCON 3 | 4 | 6 | 8
45
│
99
7.7.3 Designation of motors and dosers
Example for Falcon 6 Fert +
8. UNFOLDING AND FOLDING MACHINE
When executing any of the hydraulic movements, slow down the moving parts of the machine before position
stop by choking a relevant valve on the tractor control!
 The hydraulics of the machine must be connected to a push-pull hydraulic circuit.
 The operator must ensure that there are no people or animals within the reach of the side frames during
their unfolding or folding (i.e. in the place of their position stop) and that no one puts their fingers or other
body parts into the area of the joints.
 Execute unfolding or folding on flat and solid surfaces or crosswise to a slope.

Unfold or fold the machine only when it is lifted on the axle.
 Remove any soil stuck on the folding places as it may disturb the function and cause damage to the
mechanics.

Monitor the side frames during unfolding or folding and fold them smoothly until the end position.
Motor 3 (Dosing unit)
Motor 1 (Dosing unit)
Motor 2 (Dosing unit)
Dosing unit 1
Sensors 1-24
Dosing unit 2
Sensors 25-48