Farmet FALCON 3, Operating Manual

Page: 32 / 99

Manual
FALCON 3 | 4 | 6 | 8
32
│
99
7.5. RAIL LINES SETTING SYSTEM
The Müller electronic system allows various rail lines setting.
For basic rail lines setting, you need to know where and how many rail flaps are installed and used on the
machine. Graphic illustration follows.
A)

Two rail flaps on both sides of the machine

Our most frequently used solution

This layout of rail flaps always corresponds with
an odd number of passes of the seed drill per
width of the sprayer

It is also possible to set the rhythm of rail lines for
even number of passes of the machine, but that
requires the execution of a “zero pass”
B)

Two rail line flaps on one side of the machine (on
the right or on the left)

The location of the flaps on the right or on the left
depends on which side of the field seeding starts
on
C)

One rail line flap on one side of the machine