8.2 Hydraulics connection
•
Connect the hydraulics only when the hydraulic circuits of the machine and the tractor
(aggregate) are in a pressure-less condition.
•
The hydraulic system is under high pressure. Regularly check for leaks and immediately remove
obvious damage of all lines, hoses, and pipe unions.
•
When seeking and removing leaks, use only the suitable tools.
•
For connecting the hydraulic system of the machine to the tractor, use the plug (on the
machine) and the socket (on the tractor) of the quick-couplers of the same type. Perform the
connection of the quick-couplers of the machine to the hydraulic circuits of the tractor so that
the folding of the side frames (
RED CIRCUIT
) is on one control circuit, axle lifting (
YELLOW
CIRCUIT
) on the other control circuit and the separate axle control (
GREEN CIRCUIT
) on the
third control circuit
Red Circuit
1 tape – for folding side frames into the transport position
2 tapes – for unfolding side frames into the working position
Yellow Circuit
1 tape –lifting the machine
2 tapes – recessing the machine
Green Circuit
1 tape – lowering the machine from the axle
2 tapes – lifting the machine on the axle
In order to prevent accidental or foreign person (children, passengers) caused movement of the
hydraulics, the control switchboards on the tractor must be secured or blocked in the transport
position.
22
|
37
Summary of Contents for DUOLENT DX 460 PS
Page 2: ...2 37 Prepared by Technical Department Farmet a s on 11 10 2018 changes reserved ...
Page 4: ...PREFACE 4 37 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 37 ...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 37 ...
