30
|
36
12 MACHINE STORAGE
Long-term machine shutdown:
•
Store the machine under a roof if possible.
•
Store the machine on a flat and solid surface with sufficient load capacity.
•
Clean the machine before storing and conserve so that it is not damaged in any way during
storage. Pay special attention to all marked lubrication points and properly lubricate them
according to the lubrication plan.
•
Lay by the machine in the transport position rested on the rear roller and frames. Place a
suitable support under the frames (e.g. crossbar) so that the tips of the chisels are above the
ground. If you do not have a suitable support, dismount the chisels.
If you lay by the machine on the chisels, they might get damaged by the weight of the machine.
The damage might also incur when you lay by the machine on an uneven surface for a short time
when the weight of the machine transfers only to some chisels.
A - Sole piece
Secure the machine against access of unauthorised persons.
Summary of Contents for DUOLENT DX 210 N
